Free Shipping


Core107V is a small STM32 development board that features an STM32F107VCT6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.

As a minimal ready-to-run system, the Core107V integrates USB communication interface, JTAG/SWD programming/debugging interface, clock circuit, USB power management, boot mode selection, and so on.

Furthermore, pin headers on the backside allow the Core107V to be plugged-in your application board and act as the MCU core circuit in your system. All the I/O ports are accessible on the pin headers, and the header pitch is designed as 2.54mm.

What is On Board
STM32F107VCT6 development board on board resource

1. STM32F107VCT6: The high performance STM32 MCU which features:
– Core: Cortex-M3 32-bit RISC
– Operating Frequency: 72MHz, 1.25 DMIPS/MHz
– Operating Voltage: 2-3.6V
– Package: LQFP100
– I/Os: 80
– Memories: 256kB Flash, 64kB RAM
– MCU communication Interfaces:
— 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 2 x I2C, 1 x Ethernet MAC, 1 x USB OTG, 2 x CAN
– AD & DA converters: 2 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)
– Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
3. MIC2075 (on bottom side): onboard USB power management device
4. Power supply switch, powered from 5V in or USB connection
5. Boot mode switch, for configuring BOOT0 pin
6. Power indicator
7. Reset button
8. 25M crystal oscillator
9. 32.768K crystal (on bottom side), for internal RTC with calibration
10. JTAG/SWD interface: for debugging/programming
11. USB connector, used for establishing USB communication between PC and the STM32 development board
12. IO expander (including VCC/GND), all the MCU pins are accessible on expansion connectors for further expansion
13. 5V in pinheader, 5V power supply is required when using USB HOST/OTG
14. USB jumper
– Short the jumper when using USB
– Open the jumper to disconnect from I/O ports
15. VBAT selection jumper
– Short the jumper to use system power supply
– Open the jumper to connect the VBAT to external power, such as battery
16. VREF selection jumper
– Short the jumper to connect VREF+/VREF- to VCC/GND
– Open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Package Contents
1. Core107V development board x 1
2. USB type A to Mini-B cable x 1
3. Software CD x 1

Package Weight
One Package Weight 0.12kgs / 0.26lb
Qty per Carton 390
Carton Weight 15.00kgs / 33.07lb
Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch

OEM are Welcome! we can print customer''s artwork and logo

More Pictures


Leave a Comment